See all forum discussions about CS-2009 MRc2
 Subscribe to new posts about CS-2009 MRc2 Post a new question aboutCS-2009 MRc2
See LEEDuser’s guidance on CS-2009 MRc2»
FAQs about MRc2 :

Oops! Our trash was measured by both weight and volume at different times. How do I standardize this?

The waste management facility we are using is providing us with monthly documentation specific to our waste, showing 80% diversion. They also have a published, facility-wide rate of roughly 20%, and they have no published rate for construction waste. Will

How is construction waste accounted for when utilizing off-site construction, like modular construction or pre-fabrication of assemblies?

How does MRc2 work for projects pursuing a campus approach, or any project where waste management will be shared with other construction projects?

Can materials that have been unused and returned to the manufacturer as part of a “take-back” program contribute to the credit?

Should I include hazardous material such as lead-based paint in MRc2 calculations?

Should household-type trash from workers' lunches and office use be included in MRc2 diversion and calculations?

Can sending material to waste-to-energy plants count toward MRc2?

The requirements of this credit say that land-clearing debris does not contribute to the percentage of materials diverted from the landfill. What exactly is considered "land clearing debris"?

View answers »

Forum discussion

CS-2009 MRc2:Construction Waste Management

Rebar - Offsite Scrap Recycling

Profile picture for user rmeza_2
Roberto Meza
Sustainable Building Consultant
SPHERA Sustainable Building Consultants
LEEDuser Basic Member
43 thumbs up

Hello, We have an interesting situation at a large project, Rebar is being bought from a company which at the same time offers to bend it into the various figures needed for columns etc. This reduces the projects on-site personnel and assures quality pieces. They use the rebars the project buys and then separate the waste which is produced from the rebar, scraps, then sell the waste (small rebar pieces) to a local recycling company. This revenue is given back to the project as it was generated from its rebar scraps. Would the project be able to take into account this recycling even though it is not done on site? This scrap would be generated on-site if the company was not paid to bend the rebar, so technically it is the project which generates it. Any thoughts will be appreciated. Thanks,

0
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Default Avatar
LEEDuser Expert
472 thumbs up

Mon, 02/17/2014 - 17:26

Roberto - While this idea is well-intentioned and beneficial, I personally would not contribute it MRc2 calculations because the waste is not generated on-site. However, you could consider including the material that is sold as diverted waste and including it in your overall C&D waste calculations - as long as you explain the situation to your review team and outline it in your CWM Plan. I cannot say whether they have encountered something like this that would allow them to sanction it. I would suggest reviewing the LEED Interpretations for MRc2 to see if there is any precedence there. (I looked quickly and did not see anything that would help but please look further.) Please note that if this project were pursuing LEED v4, this strategy might be able to be considered under Option 2 Reduction of Total Waste Material under MR Credit Construction and Demolition Waste Management - as it deals with source reduction.

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.