LEED for Homes is available for use, as is LEED for Homes – Mid-Rise. Is there a reason you prefer to use EBOM?
You rely on LEEDuser. Can we rely on you?
LEEDuser is supported by our premium members, not by advertisers.
Go premium forForum discussion
LEED for Homes is available for use, as is LEED for Homes – Mid-Rise. Is there a reason you prefer to use EBOM?
LEEDuser is supported by our premium members, not by advertisers.
Go premium forTo post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.
Caitlin Levitsky
ELARA ENGINEERING10 thumbs up
December 8, 2010 - 10:33 am
My understanding was that a multi-family residential building with approximately 300 units would be best suited to be certified using LEED for Homes - Mid-Rise, but that the rating system would not be available until for registration and building certification until late 2012. I would like to register the project early in 2011 and believe that registration as LEED-EBOM would be the only rating system possible at this time. I have attempted to register the project on LEEDonline but see no option for Homes - Mid-rise.
Patti Heath
Project ManagerDavis Energy Group
5 thumbs up
December 8, 2010 - 2:35 pm
LEED for Homes Midrise is available for projects four to six stories high. If it is higher than 6 stories, then you should use NC. You should contact your local Provider for an application, checklist, requirements, etc. before you register with USGBC. Please go to USGBC's site at http://www.usgbc.org/DisplayPage.aspx?CMSPageID=2135 and click on the green "Register" button. There is no separate category for mid-rise.
Patti Heath
Project ManagerDavis Energy Group
5 thumbs up
December 8, 2010 - 2:37 pm
Sorry - correction, the Midrise category is available through the registration link above.
Caitlin Levitsky
ELARA ENGINEERING10 thumbs up
December 8, 2010 - 2:48 pm
If I was unclear, the building is existing and looking to pursue LEED certification without a major renovation. With this information, does LEED-NC still apply? As originally stated, I thought that LEED-EBOM would be more appropriate.
Patti Heath
Project ManagerDavis Energy Group
5 thumbs up
December 8, 2010 - 3:15 pm
I didn't realize it was a gut-rehab. USGBC's guidelines for gut-rehab in Homes require that most major systems and components must be replaced and exterior walls (either on the inside or outside) opened for QII. Guidelines and eligibility requirements are on the link above. We only work on LEED for Homes projects, so I guess EBOM should be more appropriate. NC for a new building.
Peter Locke
Sustainability Consulting DirectorMcKinstry
2 thumbs up
December 16, 2010 - 5:19 pm
I see that one building project (the Filmore in SF) has used EB, but I can't find any other examples and only managed it through access to the individual tenant utility bills. Has anyone tried to use Case 2 for an existing multifamily residential condo project? EAp2 and EAc 1 seem to be the major stumbling blocks here.