Forum discussion
NC-2009 IEQc8.2: Daylight and Views—Views
There is no documentation toolkit for this credit? I was looking more specifically for how to draw lines of sight on floor plans and sections? What is acceptable or not? If anybody has any they could share please send or post a link or file.
Thanks!
LEEDuser is supported by our premium members, not by advertisers.
Go premium forTo post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.
For Exemplary Performance, what is a View Factor?
Does furniture need to be included in floor plan when completing views calculations?
What is considered a regularly occupied space?
What can I do if my prescriptive method calculation results in a value less than 0.150?
What can I do if my prescriptive method calculation results in a value greater than 0.180?
Allison Beer McKenzie
Architect, Director of SustainabilitySHP Leading Design
LEEDuser Expert
646 thumbs up
August 19, 2010 - 2:06 pm
Lee- I have documentation examples on my blog here: http://www.buildingmygreenlife.com/leed-views-documentation/
Lee Dingemans
LEED APWightman & Assoc.
56 thumbs up
August 19, 2010 - 2:34 pm
That was a quick response and helpful,
Thanks a lot
Lee
JENNIFER COMEAU
26 thumbs up
August 19, 2010 - 2:38 pm
I have been using Allison's documentation example for my project, and have found it very helpful. Thanks Allison!
Another question- our CI tenant is moving onto (4) separate floors. Does anyone know if the floors are calculated individually per floor, or if the percentage is taken from the entire sum?
Allison Beer McKenzie
Architect, Director of SustainabilitySHP Leading Design
LEEDuser Expert
646 thumbs up
August 19, 2010 - 2:40 pm
Jennifer- glad it's been helpful! Assuming all floors are contained within one LEED project, it is a total sum, not the value of each individual floor.
Lee Dingemans
LEED APWightman & Assoc.
56 thumbs up
August 19, 2010 - 2:53 pm
If 75% or more of a room square footage has a direct line of sight the entire room (100%) complies and will count correct?
Allison Beer McKenzie
Architect, Director of SustainabilitySHP Leading Design
LEEDuser Expert
646 thumbs up
August 19, 2010 - 2:54 pm
Only if it's a private office.You cannot use the 75% rule with any space other than a private office.
Diaa Madkour
Architect39 thumbs up
December 16, 2010 - 2:36 am
Dear Allison,
your documents were really helpful, but i have a question concerning the spreadsheet. what is the "Area with Direct Line of Site to Perimeter Glazing" ? isn't this supposed to be the compliant area since this area has site to perimeter glazing. I'm kind of confused about it.
Nelina Loiselle
Above Green239 thumbs up
January 25, 2011 - 3:57 pm
I couldn't get Allison's link to work, could you please check and post again, I would love to see your sample documentation. Thanks in advance! Would be nice if LEED user had some, they really should.
Allison Beer McKenzie
Architect, Director of SustainabilitySHP Leading Design
LEEDuser Expert
646 thumbs up
January 27, 2011 - 12:52 pm
Nena- please try the link again- we have been work through some kinks with the web hosting which is causing really slow load times and page errors, but that is the correct link!
Tristan Roberts
RepresentativeVermont House of Representatives
LEEDuser Expert
11477 thumbs up
February 7, 2011 - 9:23 pm
Allison has also kindly allowed LEEDuser to post her views documentation examples in our Doc Toolkit, above. If anyone else has samples to share, please send me a note.