I can't use the Supplemental Spreadsheet. I believe it might be because its not designed to be very compliant with Mac software, though this is a guess. Its asking to unprotect it, then it asks for a password, and none of the relevant passwords are accepted. I've sent the problem through to "feedback" on the on-line screen and also through the GBCI through the "contact" links, but neither really feels like the right vehicle for making technical assistance requests. So this is 2 questions, really, first --is anyone else having this problem and is there a solution? and second--if I have a problem like this what is the correct avenue for assistance? thanks!
You rely on LEEDuser. Can we rely on you?
LEEDuser is supported by our premium members, not by advertisers.
Go premium for
Simon Sue
SL+A INTERNATIONAL ASIA INC.411 thumbs up
January 27, 2011 - 11:21 pm
I am having the same problem on a non-Mac computer.
Additionally, when I began my project, the calculation supplemental spreadsheet was not mentioned on the IEQc2.4 LEED Online form (BETA version) and I now find that this supplemental spreadsheet has additional information not listed in the Reference Guide --- after I have completed all documentation using a self-made excel spreadsheet.
Is it appropriate to upload my own excel file if I am having difficulty with the LEED Online spreadsheet?
Melissa Merryweather
DirectorGreen Consult-Asia
245 thumbs up
January 27, 2011 - 11:56 pm
Jason,
I can answer one of my previous questions: I have received a reply from GBCI and they confirmed that Feedback is the correct venue, but I've not yet had a reply from Feedback. I will report back with any further reply I get from Feedback's technical assistance.
Simon Sue
SL+A INTERNATIONAL ASIA INC.411 thumbs up
February 8, 2011 - 8:59 pm
Melissa -
Have you received any additional input regarding the spreadsheet issue?
Melissa Merryweather
DirectorGreen Consult-Asia
245 thumbs up
February 8, 2011 - 10:08 pm
Jason, I have not. I have the luxury of time on this one since we just began the Performance Period, and I expect it will be sorted out with future upgrades, but I'm thinking the same way as you, that I'll try my own excel sheet if this does not materialize in time. It might be a good idea to send your comment through Feedback as well; we can't be the only ones experiencing this problem!
Michael Miller
Project Architect236 thumbs up
February 9, 2011 - 4:41 pm
Has the spreadsheet been pulled from Credit Resources for EBOM IEQc2.4? The only file in there is 'skylight diagram for table.pptx'. (Or had you found it somewhere else?)
Michael Miller
Project Architect236 thumbs up
February 9, 2011 - 7:06 pm
Oops. Never mind -- apparently the spreadsheet isn't available under Credit Resources until you after you get upgraded from the beta form.
Simon Sue
SL+A INTERNATIONAL ASIA INC.411 thumbs up
February 9, 2011 - 9:30 pm
That's our experience as well --- and that is the reason we had previously created our own spreadsheet for a project. Once we updated forms form BETA to Non-BETA, the Credit Resource spreadsheet appeared.
Lauren Fakhoury
Research Assistant85 thumbs up
April 11, 2011 - 9:13 am
The supplemental calculation spreadsheet isn't supposed to be unlocked, but you should be able to fill everything out without having to alter any of the cells. You might just have to enable macros.
I'm having a problem with the spreadsheet now where in the "views" tab it isn't summing the floor areas correctly. For 2 lines, I'm getting the "#REF!" message, but since the sheet is locked it's impossible to figure out where the error is coming from! All of my rooms are listed in the views tab correctly, there are just these two extra error lines that are coming from out of nowhere!
Has anyone else had this problem? Thanks.
Tristan Roberts
RepresentativeVermont House of Representatives
LEEDuser Expert
11477 thumbs up
April 22, 2011 - 7:35 pm
No, I haven't seen this... I would ask GBCI for help.