Forum discussion

CI-2009 MRc6: Rapidly Renewable Materials

See LEEDuser’s guidance on CI-2009 MRc6 »

Biodegradable Coconut Fiber Membrane

December 5, 2013

Guillermo Hernandez Espinoza

Civil Engineer, LEED AP BD+C

LEEDuser Basic Member

8 thumbs up

December 5, 2013

Hello, I was wondering if you guys know if a Biodegradable Coconut Fiber Membrane commonly used for hydro seeding can be catalogued as a rapidly renewable material?

Thanks in advance.
Cheers.

Post a reply

Tristan Roberts

Representative
Vermont House of Representatives

LEEDuser Expert

11478 thumbs up

December 5, 2013 - 1:02 pm

Guillermo, a question like this always comes down to what CSI MasterFormat section you are classifying the product, and is that section included in LEED"s scope for MR credits?

Log in or register to post comments

Guillermo Hernandez Espinoza

Civil Engineer, LEED AP BD+C

LEEDuser Basic Member

8 thumbs up

December 5, 2013 - 4:21 pm

We classify it under CSI Number 32.90 Planting, 32.92.00 Turf & Grasses, 32.92.19.16 Hydraulic Seeding.

Log in or register to post comments

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.

See all forum discussions about CI-2009 MRc6

Subscribe to new posts about CI-2009 MRc6

Post a new question about CI-2009 MRc6

See LEEDuser’s guidance on CI-2009 MRc6 »

FAQs about MRc6:

How does this credit treat materials that come from animals such as wool or leather?

What building components are typically purchased with renewable materials to reach the 2.5% credit threshold?

A manufacturer is claiming that certain trees, e.g. balsa, acacia, mesquite, can be harvested within 10 years, and thus contribute to this credit. Is this acceptable?

We are pursuing IEQc4.5 from LEED-CI as an ID credit. Are we then required to include the cost of furniture in MRc3–7?

What building components are typically purchased with FSC content to earn this credit?

We’re having trouble getting FSC wood within our budget. Can we use products with another forestry certification?

Do I need to provide invoices for all of the new wood products purchased for the project, or just FSC wood products?

I have supporting manufacturer documentation for the FSC wood used on our project. Is this enough to document this credit, or do I need invoices as well?

Can products labeled “FSC Recycled” or “FSC Recycled Credit” contribute towards MRc7? What about "FSC Mix" percentages that refer to recycled content?

Does FSC-certified wood automatically contribute to IEQc4.4 as a low-emitting material?

We are using a lot of reclaimed wood. Should we include this in our MRc7 calculations? What about wood that is already installed on the project, in a renovation? What about wood products with recycled content?

Does FSC-certified bamboo products count towards this credit?

A product has FSC-certified veneer, but a non-certified core. Can we prorate the MRc7 contribution of this product based on the cost of the veneer?

Should wood used on site features such as benches or a gazebo be included here?

Is there a minimum quantity of wood that must be used on the project to qualify for this credit?

View answers »