In most product categories there is a wide range of Energy Star labeled products to choose from. Energy Star sets a minimum performance level, but some options are more efficient than others. As much as possible, choose the most efficient equipment. If doing that means getting equipment with a lower power rating, use the power rating from the LEED Reference Guide or from older equipment you are replacing to avoid being penalized in the credit calculation.
Each contaminated site requires different remediation efforts. The remediation technique you use should be based on the type, extent, and concentration of contamination, as well as the risk level. Some examples of remediation techniques are:
It’s important to have the support of the community when remediating a brownfield. Consider holding an open meeting to educate members of the community about the actual and perceived risks of remediating a brownfield, especially in terms of impacts on groundwater and the potential risks associated with the disruption of contaminated soils.
A Phase II ESA involves a detailed look at the site. The environmental professional takes samples and tests for contaminants on the grounds and within existing structures. High concentrations of heavy metals, toxic chemicals, or asbestos may require remediation. Petroleum byproducts, pesticides, solvents, and mold may also lead to remediation, depending on the specific chemicals and concentrations.
Implement an ongoing stormwater system maintenance plan with the landscape manager. This should include a regular schedule for monitoring the performance of the stormwater management system and guidelines for repairing or modifying site features that are causing problems. These guidelines could include replacing or increasing vegetation, redirecting runoff, and increasing storage.
Corrective actions can range from adjusting the placement of silt fencing and removing debris from stormwater catchment basins to replanting areas of temporary seeding and adding material to gravel skirts at entrances and exits.
The civil engineer, contractor, or a third party should inspect your ESC plan measures on a weekly basis (bi-weekly if inspections are also conducted after any weather event involving more than 0.5 inches of rain), and submit status reports on
If attempting one or both of the stormwater management credits SSc6.1 and SSc6.2 confirm with the contractor that the SWPPP accurately represents the hydrologic characteristics of the site and is performing as anticipated. Check on assumed
