"Calculate the total built environment area, not including the area under roof. The total built environment includes the entire lot..." change to "Calculate the total buildable land area, not including the area under roof. The total buildable land includes the entire lot..."

[Add a new paragraph before SS 4.2: Permanent Erosion Controls section]"Non-vegetated groundcover (e.g., bare mulch, pinestraw), can be used to earn credit SS 4.1, but these areas must meet the requirements under SS 4.1 (b). This includes areas where the soil below is not expected to be compacted."

"No additional points are available for exemplary performance." change to: "Projects that meet the credit requirements for 100% of sidewalks, patios, and driveways within 50 feet of the home may be awarded 1/2 point for exemplary performance, to be counted under Innovation & Design Process Credit 3."

"...where Light-Colored Hardscape includes white concrete, gray concrete, vegetation between pavers, or any material with an SRI of 29 or more." change to: "...where light-colored materials includes white concrete, vegetation between pavers, or any material with an SRI of 29 or more."

[Add new section before Exemplary Performance section] Partial CreditPartial Credit (1 point) can be awarded if a system is installed that only collects water from 25-50% of the roof area, but a storage tank must be installed to collect water for a 1-inch rain event falling on 50% of the roof area.

"Projects with a density greater than 40 dwelling units per acre of buildable land may submit a request for an exemplary performance point through their LEED for Homes Certification Provider." change to: "Projects with a density greater than 40 dwelling units per acre of buildable land should be awarded 1 point, to be counted under Innovation & Design 3."

[Add new paragraph to the end of the Calculations section] "Note that buildable land includes subdivision covenant setbacks, unless they meet the exclusion requirements described in the Note for calculating buildable area."

"Projects that implement nontoxic pest control measures beyond the maximum four rewarded in this credit can earn additional points, to be counted under Innovation & Design 3." change to: "Projects that implement more than four of the measures listed in SS 5 should be awarded exemplary performance credit, to be counted under Innovation & Design 3."

In the third paragraph of the, replace the text with the following:Licensed Professional Exemption. Licensed Professional Exemptions(LPEs) can be used by a project team\'s registered professional engineer,registered architect, registered interior designer, or registered landscapearchitect as a streamlined path for documenting certain credits, orbypassing otherwise-required submittals. License information and anExemption Signature in LEED Online are required to document eachexemption the project team wishes to claim.

Following the first line in the Sustainable Sites section, insert the text "SS Credit 2 Development Density and Community Connectivity" as a new line