Under "Step 1. Identify candidate systems for submetering", add a new bullet point to the end of the bulleted list:

"If flush fixtures and flow fixtures as described in WE Prerequisite Indoor Water Use Reduction are submetered separately (i.e. not aggregated), this approach contributes as two water subsystems for credit compliance."

Move bullet number 3 before bullet number 2 and renumber accordingly.
Add the following text at the beginning of the “Creating the Baseline Building”:
"The baseline building design shall be a design that exhibits industry-standard materials and practices for a building that meets the functional requirements of the project. The actual design should demonstrate a design that deviates from those industry-standard materials and practices – for example, the use of lower-impact materials or dematerialization, or a system not commonly used in that application.

Add the following language under Campus Approach section:
"Eligible. Projects can demonstrate compliance with a campus-wide no-smoking policy in lieu of building signage. The policy must be widely communicated to all occupants (including transients and visitors) through ongoing methods such as site signage and other media (brochures, websites, etc.)."

Under "Process for attempting credit substitutions:" replace item 4 with the following:

"Delete the three bullets under ""Certification:""

TR Credit: Compact, MIxed Use, and Transit Oriented Development:
Add the following language under the Required Documentation Table:

"Demonstrate achievement of various credits (as applicable) in Transportation and Land Use category for sample CCCs identified using following methodology:

In Further Explanation, Determining Major Energy End Uses, before the paragraph starting with “Choosing what equipment and components to group”, add the following paragraph:

It is acceptable to exclude a small portion of the total loads from each end-use category. Not more than 10% of the total connected load of any of the required end-uses is permitted to be excluded from that end-use advanced metering data collection. Not more than 10% of the total connected load of any of the end-uses where metering is required is permitted to consist of loads not part of that end-use.

Insert the term "Bay" in alphabetical order with the accompanying text "A bay is a component of a standard, rectilinear building design. It is the open area defined by a building element such as columns or a window. Typically, there are multiple identical bays in succession."

At the end of the paragraph, add the addition text "For residential projects, the occupants have a higher level of control over the building systems and are therefore not eligible for this credit."

Replace the second paragraph with the following text:During the design phase, the architect should consider the location andtype of entryway systems and allow adequate space for entryway systems.During the schematic design phase, the team should confirm the locationsof areas where chemicals and high-volume copy, fax, and print equipmentwill be used. It may be possible to locate such rooms above or adjacent to1 another to make individual exhaust systems unnecessary and minimizeexhaust ductwork. Also confirm that chemical and equipment rooms areproperly isolated from adjacent spaces.