- Delete Step 1. Determine Walk Score Availability
- Delete Figure 11
- Delete header "Step 2. Use Alternative to Walk Score" but retain content below.
- Change first bullet to "Determine whether the project site is larger or smaller than 2 acres (0.8 hectare)."
- Change second bullet to reference Figure 11, instead of Figure 12.
- Rename Figure 12 to Figure 11
- Rename Figure 13 to Figure 12
- Change fourth bullet to reference Figure 12, instead of Figure 13
- Rename Figure 14 to Figure 13

under "Step 6. Calculate additional reduction from baseline for smart irrigation controls":

replace the last word in the second sentence, "baseline", with the phrase "landscape water requirement."

Replace "none" under "Changes from LEED 2009" section with the following content:

"The compliance path for economic feasibility of a CFC phase out plan was removed from this credit."

BD+C:
Option 2. Parking under Cover,
Step 1. Determine total vehicle parking spaces in project
Replace both bullets with this "Do not count motorcycle or bicycle parking spaces as vehicle parking spaces"

O+M:
Step 1 Identify parking, hardscape and roof area
Replace first bullet with "Do not count motorcycle parking spaces as vehicle parking spaces. Exclude bicycle parking area."

ID+C reference guide, STEP-BY-STEP GUIDANCE section:

Under Step 4. Select High-Efficiency Appliances, add the following content after the sentence that begins "ENERGY STAR may not be readily available in all areas": "Existing appliances intended for reuse in the project are not required to meet the requirements in Table 2. Standards for appliances"

Add the following content to the end of the "International Tips" section:

“Projects served by water supply pressures different than specified in LEED v4 may install pressure compensating aerators in flow fixtures to achieve the desired flow rate without compromising user satisfaction.”

April 6, 2018 Update:

Update the Block Length Calculations to read as follows:

Total Project Street Frontage = 350ft
Total Frontage with Minimum Ratio = 300ft
Frontage Achieving Minimum Ratio = 85%

Under the GIB section, for the Heat Island Reduction credit, in the"existing features" column, of Option 3. Mixed Roof and Nonroof Measures, delete the word "buildings" from the cell.

Under the GIB section, for the Optimize Building Energy Performance credit, in the "existing features" column, revise the text to read at "Major Renovations."