Remove all section text and replace with new text as indicated in the supplemental documentation.

Below the text of the "PATH 2" section text, insert the following section:Path 3. Pilot Credit (1 point)Attempt a pilot credit available in the Pilot Credit Library atwww.usgbc.org/pilotcreditlibrary. Register as a pilot credit participant andcomplete the required documentation. Projects may pursue more than 1pilot credit; however, a maximum of 1 point will be awarded.(Please note that this section was updated on Februrary 2, 2011).

Replace the first paragraph with the following text:Light areas only as required for safety and comfort. Exterior lightingpower densities shall not exceed those specified inANSI/ASHRAE/IESNA Standard 90.1-2007 with Addenda? for thedocumented lighting zone. Justification shall be provided for theselected lighting zone. Lighting controls for all exterior lighting shallcomply with section 9.4.1.3 of ANSI/ASHRAE/IESNA Standard 90.1-2007, without amendments?.

At the end of the third line in the first paragraph, insert sentence "Meet exterior lighting control requirements from ANSI/ASHRAE/IESNA Standard 90.1-2007 (with errata but without addenda

In the first line of the paragraph, the ")" after the text "device of" is moved to follow the word "device" so it becomes "(by automatic device) of..."

At the end of the paragraph, insert new text as indicated in the supplemental document.

In the item title, replace "high-a ctivity" with "high-activity" so the text becomes "LZ4: High2 (high-activity commercial districts in major metropolitan areas)"

Replace the entire text with "? The requirement to use ASHRAE Addenda I is unique to this credit and does not obligate Project teams to use ASHRAE approved addenda for other credits."

Remove the heading "CASE 1. All Projects"

In the "CASE 2" heading, remove the word "Only" so the text becomes "CASE 2. Residential and Hospitality Projects"