On LEED online the Regional Priority Credits show we are eligible within a
credit threshold (ie. Optimize Energy Performance) but in the Innovation
threshold is says we are not eligible? Please advise.
You rely on LEEDuser. Can we rely on you?
LEEDuser is supported by our premium members, not by advertisers.
Go premium for
Afogreen Build
www.afogreenbuild.comGreen Building Consultant
247 thumbs up
July 16, 2021 - 3:42 am
Hi Katie,
Have you been trying to use different browser? We saw not exactly the same but quite similar problem in this link (https://leeduser.buildinggreen.com/forum/no-credit-uploads-available-credit-light-pollution-reduction-within-project) and suggest using different browser. If Regional Priority credits for other credits is eligible, it is also supposed to be eligible for Innovation credit.
Katie Vasbinder
July 16, 2021 - 11:59 am
I've tried Microsoft Edge, Google, and Mozilla Firefox and none of them work. The regional priority credits do not show up nor does the small gray magnifiying glass at each credit to opt for a 4.1 version credit instead which I've also messaged about a while a go with no response. Please advise as soon as you can. Thank you - Katie
Deborah Lucking
Director of SustainabilityFentress Architects
LEEDuser Expert
258 thumbs up
July 16, 2021 - 1:00 pm
Just tried using Internet Explorer and it worked https://www.usgbc.org/regional-priority-credits.
Good luck.
EDIT - Chrome as well.
Katie Vasbinder
July 16, 2021 - 1:16 pm
Maybe I'm not communicating this correctly. I am trying to see where I can submit/check this on LEED online? Under Innovation and Design it still indicates "Based on your location, you are not eligible for an additional Regional Priority credit point for this credit." However, on the link you sent me it appears we should have 6 regional priorities available.
Deborah Lucking
Director of SustainabilityFentress Architects
LEEDuser Expert
258 thumbs up
July 16, 2021 - 1:43 pm
Katie
make sure you meet the threshold number of points. Also, Regional Priority points are not typically tied to Innovation and Design. RP points are tied to Credits within the particular rating system (BD+C, C+S, etc.). Innovation credits are achieved by going OUTSIDE that rating system.
Katie Vasbinder
July 20, 2021 - 8:57 am
Do credits tied to RP points have to be approved in order for the RP point to show? Or should they show up if you are attempting which they currently don't? It's a bit unnerving if they only show up after a credit is approved. Thanks for the info!
Deborah Lucking
Director of SustainabilityFentress Architects
LEEDuser Expert
258 thumbs up
July 20, 2021 - 2:12 pm
There is what looks like a grey color magnifying glass icon next to thecredits that have regional priority. When you check "credit complete" and have sufficient points to earn the RP, the icon switches to a color (orange for now).