Hello,
In terms of documenation required to be submitted for this credit, under "Building facade and site features" it reads to include a material list and supporting data for materials with a Threat Factor below 15. Is it necessary to submit manufacturer literature for building materials that would not have a threat factor (i.e., brick, ACM panels, etc)?
Stephanie Graham
Sustainability ManagerBurns & McDonnell
26 thumbs up
November 20, 2020 - 2:50 pm
My project is a very simple insulated metal panel system with some daylight glazing on one facade. I plan to list the few materials we have, identify their threat factors from the Threat Factor Values Sheet and include photos to demonstrate all the exterior building elements. Though my building is (opaque) insulated metal panel, it has a vertical "noisy" pattern. The existing glazing has a grid dot transfer that meets one of the specifications for adhesive films for vinyl appliques on existing glazing listed on the Threat Factor Values Sheet, including dot size,pattern spacing and surface. If I get comments I will post. I expect to submit for design review before end of the year.
Michelle Halle Stern
Senior Sustainability ConsultantGreenwood Consulting Group
121 thumbs up
March 2, 2021 - 5:21 pm
I don't think it's necessary to include building material supporting data for materials with a threat factor of less than 15.