We are currently preparing the drawings to submit to USGBC. Our project is a multi-occupancy large-scaled project; therfore, there are many other consultants to work on the project, and we have to include drawings prepared by 2 different landscape architects in a set for SSc7.2.
As they are different entities, the drawings are separately prepared, areas by areas, according to their scope of works. Also, it seems to be usual for them to have separate drawings for hardscape and softscape, and as a result, there are 1. Hardscape dwgs by A firm, 2. Softscape dwgs by A firm, 3. Hardscape dwgs by B firm, and 4. Softcape dwgs by B firm.
I would like to see if we can have 4 separate drawings for submission - each drawing is neatly colored or hatched indicating finishes, plants, etc., instead of having all drawing overlaied. Since the project is large-scaled, if we have all of them overlaid, it becomes really hard to see what finishes are.
Thank you for your time in advance and I very much look forward to your advice.
Yuko Murata
Architect, LEED AP BD+CNikken Sekkei
1 thumbs up
June 18, 2020 - 9:55 pm
It would be very much appreciated if I can lend your expertise.
Summer Minchew
Managing PartnerEcoimpact Consulting
LEEDuser Expert
170 thumbs up
June 19, 2020 - 7:54 am
Is your project registered under LEED v2009 or LEED v4? With your comment being here on the LEED v2009 CS forum for Heat Island Effect - Roof, you should only be looking at roofing materials for this credit. If you are referencing LEED v2009 CS Heat Island Effect - Nonroof credit, you should only be looking at site hardscape materials. In any case, I think it is fine to submit separate drawings but make sure you are only highlighting components that are relevant to the credit.
Yuko Murata
Architect, LEED AP BD+CNikken Sekkei
1 thumbs up
June 19, 2020 - 7:32 pm
Thank you, Summer.
It's LEED CS 2009 and about podium roofs with pools/pavers/landscaping where people can walk on.
we will keep the files separately to submit.
Thank you!