See all forum discussions about EBOM-v4 EQp1
 Subscribe to new posts about EBOM-v4 EQp1 Post a new question aboutEBOM-v4 EQp1
See LEEDuser’s guidance on EBOM-v4 EQp1»
FAQs about EQp1 :

We have a VAV system where single AHUs serve multiple zones. Do we need to take outside air measurements at each VAV box?

Our building has a single fan that supplies outside air to multiple AHUs. Do we need to perform outside air testing at the supply fan or at all AHUs?

What if our systems do not meet the required outside air when systems are tested at worst-case conditions?

What if after our Preliminary Review we have to revise the ventilation rate procedure calculations and find that we need to make corrections to the system in order to meet the prerequisite? Can we redo the outside air testing after making corrections? Wou

My building has 80 AHUs providing ventilation to building spaces. Do I have to do the ventilation calculations and conduct outdoor air measurements for each one?

Our system cannot provide enough outdoor air to meet ASHRAE 62.1-2010 due to design limitations. How much outdoor air must we provide to meet Case 2 instead?

The outdoor air intake for our ventilation system is not accessible, and it’s not possible to measure the outdoor airflow directly. How can we determine the outdoor airflow for this system?

How do I find whether my project is located in a non-attainment area for particulate matter or exceeds the prerequisite ozone requirements?

What happened to the IEQ Space Matrix that was available to version 2009 projects? What should I reference to determine how spaces in my building should be categorized for this prerequisite?

View answers »

Forum discussion

EBOM-v4 EQp1:Minimum indoor air quality performance

Measure Outdoor Airflow Rates - Mechanically Ventilated Spaces

Is it possible to sustain, as a method of measuring the external air flow, the data recorded in the mechanical design drawings? Thank you

0
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Profile picture for user tlittle
Trista Brown
Project Director
WSP USA
LEEDuser Basic Member
381 thumbs up

Tue, 07/25/2017 - 23:18

Hi Sebastian, information on mechanical drawings can be used to develop your VRP calculations, but you have to take actual outside air measurements at the system level for this prerequisite.

Tue, 07/02/2024 - 10:54

Do we need to provide evidence of delivering fresh air supply to all occupiable spaces (lif lobbies, reception, offices, meeting rooms, ) as an existing building?

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.