Forum discussion
NC-2009 EAc2: On-Site Renewable Energy
Dear Concern:-
I have some doubt in this credit
1.Off site renewable energy is Qualified for this credit
2.Is there any specific distance for off site (like kilometres / Miles)
3.Is there any point scale for off site to claim in this credit
4.In EA PR 01 form it is available like ON & Off site, is it correct
LEEDuser is supported by our premium members, not by advertisers.
Go premium forTo post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.
Can I pursue this credit if I am using one of the prescriptive compliance paths for EAp2/EAc1?
Can I really double-count onsite renewable energy in both EAc2 and EAc1?
Our PV system is being installed after the building is occupied. Is that okay?
SAMY Chamy
EnginneerT&T Green
12 thumbs up
May 1, 2017 - 4:13 am
Awaiting for the reply
Marcus Sheffer
LEED Fellow7group / Energy Opportunities
LEEDuser Expert
5909 thumbs up
May 1, 2017 - 9:11 am
1. yes in certain circumstances, you need to read the interpretations on the subject
2. No
3. same point scale.
4. EAp1 is about commissioning. If you mean EAp2 then if it qualifies for EAc2 then you can count it for EAp2/EAc1.
Ruju Rathod
Sr. Sustainable Design SpecialistHOK
1 thumbs up
November 22, 2019 - 1:27 pm
Can someone direct me to the CIR that states that
Off-site renewable energy can be used to offset the building energy cost savings as part of the energy model?
What are the conditions that the off-site PV array has to fulfill to be used as part of the energy model?
Regards,
Ruju
Marcus Sheffer
LEED Fellow7group / Energy Opportunities
LEEDuser Expert
5909 thumbs up
December 2, 2019 - 1:01 pm
The best way to find an interpretation is to simply Google the subject matter along with the words LEED Interpretation. So in this case i would try LEED Interpretations off-site PV.