See all forum discussions about EBOM-2009 EAp2
 Subscribe to new posts about EBOM-2009 EAp2 Post a new question aboutEBOM-2009 EAp2
See LEEDuser’s guidance on EBOM-2009 EAp2»
FAQs about EAp2 :

Our building includes a large laboratory space. Can our project benchmark under the Labs21 program?

We have an international project and the space type is eligible for an Energy Star rating. Can we pursue Case 1 to demonstrate compliance given the recently released alternative compliance paths for international projects?

We have a number of buildings on a single campus that we would like to certify at the same time. Is it possible to benchmark the buildings at the campus level?

I have a mixed-use building and am wondering if it is possible to pursue the prerequisite through Case 1. How do we proceed?

We have a building that consists of two attached structures and it’s unclear if we have to consider it a single building or if it should be certified as two separate buildings and benchmarked accordingly. How should we proceed?

How long is an Energy Star label valid to use with a streamlined approach for Case 1?

Our building includes heavy process loads that significantly increase the overall energy use in the building. If we submeter these loads, can we exclude this energy use for benchmarking purposes?

We have installed submeters on our building but the utility bill includes energy use from several other buildings located on the same campus. How do we reconcile this during the LEED review process?

When is it possible to exclude up to 10% of the building from EAp2?

What do I do if the number of building occupants, operating hours, or vacant space changes during the performance period?

If you pursue the streamlined path for an Energy Star label, should the performance period for EAc6 match the 12-month time frame of the label?

How do I account for computers with multiple monitors on Portfolio Manager?

How should I treat vacant space on Portfolio Manager?

View answers »

Forum discussion

EBOM-2009 EAp2:Minimum Energy Efficiency Performance

Platinum Certification

We had submitted one of our LEED EBOM project final review and received 72 points. We had accepted the review and received Certified Gold Level. Now after some duration our client is compelled to go for Platinum Certification by achieving additional credits. What procedure shall be required to achieve our goal? Thanking you in anticipation of your prompt response in this regard.

0
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Profile picture for user tlittle
Trista Brown
Project Director
WSP USA
LEEDuser Basic Member
381 thumbs up

Fri, 02/03/2017 - 14:57

I don't believe you'll be allowed to attempt additional points after accepting the Final Review, but I recommend contacting GBCI directly to ask.

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.