See all forum discussions about NC-2009 MRc2
 Subscribe to new posts about NC-2009 MRc2 Post a new question aboutNC-2009 MRc2
See LEEDuser’s guidance on NC-2009 MRc2»
FAQs about MRc2 :

How is construction waste accounted for when utilizing off-site construction, like modular construction or pre-fabrication of assemblies?

How does MRc2 work for projects pursuing a campus approach, or any project where waste management will be shared with other construction projects?

Can materials that have been unused and returned to the manufacturer as part of a “take-back” program contribute to the credit?

Should I include hazardous material such as lead-based paint in MRc2 calculations?

Should household-type trash from workers' lunches and office use be included in MRc2 diversion and calculations?

Can sending material to waste-to-energy plants count toward MRc2?

The requirements of this credit say that land-clearing debris does not contribute to the percentage of materials diverted from the landfill. What exactly is considered "land clearing debris"?

Oops! Our trash was measured by both weight and volume at different times. How do I standardize this?

The waste management facility we are using is providing us with monthly documentation specific to our waste, showing 80% diversion. They also have a published, facility-wide rate of roughly 20%, and they have no published rate for construction waste. Will

View answers »

Forum discussion

NC-2009 MRc2:Construction Waste Management

Recording the recycling of "whitegoods"

Profile picture for user GreenDesign
Neumann Monson
Neumann Monson Architects, Inc.
LEEDuser Premium Member
0 thumbs up

In an effort to achieve a 95% diversion rate, my team will be submitting waste receipts for the demolition of two buildings that existed on our site before construction of the new project began. As a part of these demolition receipts, I have a series of "whitegoods" receipts for refrigerators, copy machines, drinking fountains, etc. which were recorded per appliance, rather than by weight. Does anyone have experience in recording the recycling of white goods, and if so how would I best record them on LEEDonline given that they were not weighed at the time of recycling? Thanks!

0
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Default Avatar
LEEDuser Expert
472 thumbs up

Thu, 09/03/2015 - 17:11

Chris - I don't have any personal experience with this but when I have documented recycled materials from the job, I've either gotten the weight or volume of the items to use for this credit. The LEED Reference Guide has a Solid Waste Conversion factor table but that doesn't help you much as it doesn't cover appliances. If you don't have model information, it will be hard to get the diverted material weight and have it be able to be defendable for LEED. Have you tried contacting any of the Resources in Section 12 of the LEED Reference Guide to see if they have any advice (like http://www.calrecycle.ca.gov)? I hope if other LEEDusers have experience with this that they will chime in.

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.