Forum discussion
CS-2009 EAp2: Minimum Energy Performance
Does anyone know whether LED monitors for advertisement are considered as exterior lighting? Does it need to comply with the 2.2W/m2 Exterior LPD requirement as stipulated in ASHRAE 90.1?
We have a project that is designed to have a podium LED facade solely for advertisement, either stationary images or animation. Can it be excluded from the ASHRAE LPD requirement? Do I need to model the energy use of the LED podium box in our models?
LEEDuser is supported by our premium members, not by advertisers.
Go premium forTo post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.
A portion of our building envelope is historic. Can we exclude it from our model?
For an existing building, do I need to rotate the model?
Our process load is higher than 25%. Do we have to justify that?
Our local code references ASHRAE 90.1-2010. Should I use that for my documentation, or 90.1-2007?
Can mezzanines open to floors below be excluded from the energy model?
How do I provide a zip code for an international location?
For a project outside the U.S., how do I determine the climate zone?
For a project outside the U.S., how do I determine the Target Finder score?
Do hotel rooms need automatic light shut-off control?
How commonly are the 90.1 mandatory compliance forms submitted as part of EAp2/EAc1?
The Section 9 space-by-space method does not include residential space types. What should I use?
Can the Passive House Planning Package (PHPP) be used to energy model for LEED?
Which baseline HVAC system do I use if my building has no heating or air conditioning?
Our project has a diesel backup generator. Should we include it in our energy model?
Can SHGC be higher in the proposed than in the baseline model?
Marcus Sheffer
LEED Fellow7group / Energy Opportunities
LEEDuser Expert
5909 thumbs up
January 27, 2015 - 12:45 pm
Advertising signage is an exception (see Section 9.4.5 Exception b).
It is excluded from the exterior LPD requirements. It must be included in both models identically. The energy models must always include all the energy associated with the project.