See all forum discussions about CS-2009 MRc4
 Subscribe to new posts about CS-2009 MRc4 Post a new question aboutCS-2009 MRc4
See LEEDuser’s guidance on CS-2009 MRc4»
FAQs about MRc4 :

Is the default average recycled content value of 25% for steel still allowed?

Can site materials, such as soil, be included in the MR credit calculations?

Are there recycled content claims that I should be wary of?

Can I count FSC-certified MDF toward both MRc4 and MRc7?

If I have one cut sheet that meets the LEED 2009 requirement to upload 20% of cut sheets by cost, for this credit, is that acceptable?

I have recycled content information for a product, but it doesn’t specify whether it is pre-consumer or post-consumer. What should I do?

The recycled content percentage on the product data sheet is given as a range. What should I do?

The manufacturer can't give me product-specific recycled content data, but they say that they fall within the national industry average. Can I use that?

View answers »

Forum discussion

CS-2009 MRc4:Recycled Content

MRc4 Recycled Content

Hi - a masonry subcontractor provided me with the total cost of the CMU block, however, he broke out the recycled content of each component of the CMU, i.e., he gave me the % of cement, fly ash, recycled concrete - how do I enter that into LEED Online? Thanks!

0
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Default Avatar
LEEDuser Expert
472 thumbs up

Thu, 06/19/2014 - 13:43

Chris - First were the breakout % by weight? If so, you have you what you need. If not, you need the breakout % by weight before moving forward. What I would do is list the CMU as a line item in the BDC Materials and Resources Calculator. (I am assuming that the CMU is regional and you want the remainder of the block counted for its regional contribution - 100%.) Title it “CMU less recycled components.” Then I would list the items that are recycled on separate lines underneath - fly ash in CMU, recycled aggregate in CMU, etc. Subtract the cost of those items from the overall cost of the CMU and use that remaining cost for the “CMU less recycled components” line. Then you can say 100% pre-consumer for fly ash in CMU and include the cost. Do this for all recycled components. Those components are probably regional as well so add that information in - 100% regional. Hope this gets you on your way.

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.