See all forum discussions about EBOM-2009 EAp3
 Subscribe to new posts about EBOM-2009 EAp3 Post a new question aboutEBOM-2009 EAp3
See LEEDuser’s guidance on EBOM-2009 EAp3»
FAQs about EAp3 :

If a project’s base-building systems do use CFCs, and an economic analysis is required, is it necessary to analyze both the conversion AND replacement of those building systems?

The LEED Reference Guide states that if CFCs are maintained in the building, the project building must reduce annual leakage to 5% or less, and total leakage over the remaining life to less than 30%. However, the EAp3 credit form does not request informat

Do small appliances (such as refrigerators and water coolers) that have greater than 0.5 pounds of refrigerant have to be included in order to achieve EAp3?

View answers »

Forum discussion

EBOM-2009 EAp3:Fundamental Refrigerant Management

Manufacturer specs required or are nameplates sufficient?

Are you required to provide the manufacturer's specifications, or is it enough to upload the nameplates to LEED? I have an inventory of all HVAC equipment with manufacture name, model, serial number and refrigerants used gathered from the nameplates but an unable to obtain the original manufacturer's specifications.

0
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Profile picture for user tristanroberts
Tristan Roberts
Representative
Vermont House of Representatives
LEEDuser Expert
7780 thumbs up

Sun, 09/08/2013 - 17:53

Alice, I'd say nameplate is sufficient. This is the kind of information that is often possible to find for existing building systems, whereas original specs can be hard to track down, or impossible.

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.