See all forum discussions about NC-2009 IEQc4.3
 Subscribe to new posts about NC-2009 IEQc4.3 Post a new question aboutNC-2009 IEQc4.3
See LEEDuser’s guidance on NC-2009 IEQc4.3»
FAQs about IEQc4.3 :

On a renovation, should flooring that is previously installed be subject to the credit requirements?

One flooring adhesive we are using falls under both IEQc4.1 and IEQc4.3, and is over the VOC limit. We are using the VOC budget method to meet IEQc4.1 requirements, but are we automatically disqualifed from IEQc4.3?

The credit requirements are allowed to exempt unfinished wood flooring from the credit requirements, but wood flooring is almost always finished. This is confusing!

I have an international project and my flooring products aren’t tested using any of the above standards. How can I tell if they still comply?

If I have no flooring products in the scope of my project, can I earn this credit?

How do I handle a polished concrete floor?

Should mineral-based finish flooring products (without any integral organic-based coatings and sealants) and unfinished/untreated solid wood flooring be documented on the IEQc4.3 LEED Online form, even though they are exempt from certification requirement

View answers »

Forum discussion

NC-2009 IEQc4.3:Low-Emitting Materials—Flooring Systems

Cork Flooring

Default Avatar
Sheela I
LEEDuser Basic Member
69 thumbs up

If the Cork flooring exceeds air quality standards established by SCAQMD rule 1168 - Can we consider that it meets the option # 2 of IEQc4.3 "California Department of Heath Services standard"?

0
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Wed, 05/01/2013 - 18:45

Hi Sheela, You would have to test it under Option 2's requirements in order to verify that it complies.
Profile picture for user jjacobs_1
Josh Jacobs
Technical Information & Public Affairs Manager
UL Environment
LEEDuser Basic Member
356 thumbs up

Wed, 05/01/2013 - 20:50

Just a quick clarification as sometimes this is a common misconception from builders and code officials. The builder has not traditionally tested the product. Traditionally manufacturers of products test and certify low-emitting products. That cost is not traditionally taken on by the builder.
Default Avatar
Sheela I
LEEDuser Basic Member
69 thumbs up

Thu, 05/02/2013 - 13:09

Thank You Lauren and Josh. We have received an email from the manufacturer confirming that their "Eco Scorecard confirms that they meet/exceed California Dept. of Health Specifications Section 01350, as well as specification required for South Coast Air Quality Management District Rule #1168". Can we upload the email confirmation as the supporting documentation?

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.