I am new to the LEED process. I am having trouble determining which categories the following products fall under for the purpose of IEQ Credit 4.1. The products were included in a plumbing piping insulation submittal. Is there a list of products for each category that I can use as a reference?
• Armacell 520 Adhesive
• Foster 81-42 Lagging Adhesive
• Childers CP-70 Chil-Joint Sealant
• Foster 30-35 Tite Fit Coating
Thank you.
You rely on LEEDuser. Can we rely on you?
LEEDuser is supported by our premium members, not by advertisers.
Go premium for
John-David Hutchison, LEED AP BD+C, PMP
Sustainability ManagerBGIS
LEEDuser Expert
166 thumbs up
November 26, 2012 - 1:44 pm
Armacell 520 Adhesive
- CONTACT ADHESIVE is an adhesive applied to two separate surfaces, allowed to dry, and brought together for adhesion and bonding with subsequent pressure. VOC limit-80 g/l
• Foster 81-42 Lagging Adhesive
This is a tricky one. the product does 2 jobs; Fire Resistive Lagging Adhesive and Coating.
Previously, it would have been Fire-Retardant Coatings*** Clear 650 Pigmented 350, but as this is no longer available as a menu choice,
I would be inclined to enter it as a Multipurpose Construction Adhesive max 70g/l
• Childers CP-70 Chil-Joint Sealant
Architectural Sealant
• Foster 30-35 Tite Fit Coating
What is this product being used for?
Although it states coating, the product can be used for vapor sealing - If this is it's intended purpose, you could submit it as an Architectural Sealant.
Good luck!