FAQs about EAp2 :

Can the Passive House Planning Package (PHPP) be used to energy model for LEED?

Is it acceptable to model a split-type AC with inverter technology compressor as a heat pump, like modeling VRF?

Can the Trace 700 'LEED Energy Performance Summary Report' by uploaded to LEED Online in lieu of the Section 1.4 tables spreadsheet?

A portion of our building envelope is historic. Can we exclude it from our model?

Which baseline HVAC system do I use if my building has no heating or air conditioning?

For an existing building, do I need to rotate the model?

Our project has a diesel backup generator. Should we include it in our energy model?

Our project has a large process load—75%. Despite our efforts to make an efficient HVAC design, the cost savings are minimal. What can we do to earn this prerequisite and be eligible for LEED certification? Is there any flexibility in how we model the p

Can SHGC be higher in the proposed than in the baseline model?

Our process load is higher than 25%. Do we have to justify that?

Do I need to justify the electrical and fuel rates I am using in my model?

Our local code references ASHRAE 90.1-2010. Should I use that for my documentation, or 90.1-2007?

Can I claim exterior lighting savings for canopy lighting even though a baseline model cannot include shading elements?

The project is built on a site with existing exterior lighting installed. How should this be accounted for?

Can mezzanines open to floors below be excluded from the energy model?

How do I provide a zip code for an international location?

For a project outside the U.S., how do I determine the climate zone?

For a project outside the U.S., how do I determine the Target Finder score?

Do hotel rooms need automatic light shut-off control?

How commonly are the 90.1 mandatory compliance forms submitted as part of EAp2/EAc1?

View answers »

Forum discussion

NC-2009 EAp2:Minimum Energy Performance

Separating High Energy Consumer as a "Process Load"

I have a project that is just starting and we have a somewhat unique situation. The building is a 2-story office building and the computers being used within the building are server grade machines which consume nearly 900 watts of energy each (typical consumption - not peak consumption)! I have prepared an energy model for the building including the computers and the result is a process load that is 64% of the total energy consumed by the building. The server grade pc's are the primary consumer of the process energy. Can I exclude the difference between the server grade pc's and standard pc's from the building energy calculations? Is this simply documented in the narrative?

1

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Fri, 04/27/2012 - 14:27

Nope you must include the servers. You might want to look at LEED 2012, back out for public comment on May 1, for some guidance regarding data centers.

Fri, 04/27/2012 - 15:02

Marcus - thanks for the reply. I'm discouraged though to learn that there is no way to exclude the servers from the overall consumption.

Fri, 04/27/2012 - 15:26

The rational is pretty simply. The environment does not care if it is a kWh of consumption used for lighting or servers, regulated or non, process or not. That is why LEED makes you count it all. Nothing can be excluded. The design team includes the owner so this item is within your collective control even if you are not designing it. So given the situation this should force a conversation with them about the energy use of the servers. On one of our recent projects the owner was shown the energy implications of adding additional servers and then decided to not add them! Part of that conversation should include an exploration of more energy efficient options for the servers. As I said look to LEED 2012 for a possible baseline to use for the servers to claim savings against. The real point is to save energy. As I have said before do not seek exclusions but rather seek opportunities for even greater savings. In the spirit of LEED seek to find a way to use less, not an excuse to use more.

Thu, 05/03/2012 - 13:24

Hi, have been looking through LEED 2012 (not sure which public comment version) and cannot find a reference for a figure we can use as a possible baseline for server loads. I did find an old document (LEED® Green Building Rating System™ For Core & Shell Development Version 2.0) that gives a figure of 50w/sqft for server rooms in shell and core buildings. Would this be a reasonable baseline to use?

Thu, 05/03/2012 - 16:13

The public comment version for 2012 should be stated on the first page. The data center guidance is at the end of the Minimum Energy Performance prerequsite. I just looked it over and it gives some modeling guidance but not a definative baseline. I do know that the industry has had difficulty coming to agreement on the appropriate metric, let alone a definitive baseline. The next place I would look is in COMNET. Not sure about the old CS value as this the data center industry changes fast.

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.