Forum discussion
CS-2009 WEp1: Water Use Reduction
How to earn Water Use Reduction Points, when the local code requires e.g. minimum flow for Commercial lavatory faucets=1.6 gpm and over the baseline for other fixtures, too.
LEEDuser is supported by our premium members, not by advertisers.
Go premium forTo post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.
Can you explain the 12-second duration for metering faucets?
Can I use a nonpotable water source to contribute to WEp1 compliance?
We are having trouble finding EPAct-compliant fixtures. Is that a problem?
Where can I find a clear meaning of "public" and "private" as relevant to lavatory faucets?
Are shower duration controls an acceptable water-saving strategy?
Can I include process water savings in order to earn an Exemplary Performance point?
Tristan Roberts
RepresentativeVermont House of Representatives
LEEDuser Expert
11478 thumbs up
December 7, 2010 - 10:24 pm
For all other fixtures?You could submit a CIR to see if based on the code requirements there is some way around the prerequisite.However, the surest way would be the use rainwater, etc., to substitute for potable water demand.
Tapio Peltonen
Sr. Mechanical EngineerGranlund Oy
67 thumbs up
December 8, 2010 - 10:50 am
Thanks Tristan, we may just submit a CIR, since Water Efficient Landscaping points would be easy here with no shortage of fresh water, if we get around the prerequisite. Minimum flow for all other fixtures, except toilets and urinals is over the baseline in local code. That keeps the sewer lines healthy.