For a building I have to use the Building Area Method (ASHRAE 90.1-2007, 9.5.1) because some calculations were already developed through that method and now changing the method would be complicated

Hello, For my project building the mechanical engineer has provided me with his VAV sizing calculation spreadsheets for all zones and all floors.

I talked to a leading manufacturer of thermal barrier tape which typically requires an EPD to be included in the credit.

SS C6.1 has two cases: Case 1: Sites with existing imperviousness 50% or less: Requires proposed runoff not exceeding the existing runoff. Case 2: Sites with existing imperviousness greater than 50

Is there a minimum number of logs required to be submitted to comply with this credit? The project I am handling wishes to install the meter but because of the log requirement, we might need to de

Hai, my project use epoxy glue for anchoring rebar from brick wall to column and slab in indoor area. Does it must meet LEED requirement for adhesive and sealant?

I wish that this Pilot Credit had some sort of sliding scale built-in for the size of the donation.

I am trying to use this on a new construction, residential project. Has anyone been successful in using this credit as a pilot credit or innovation credit for NC?

Hi In our Project we can't apply deck-to-deck partitions in some janitor rooms so we are looking for (hard-lid ceiling) option.

Dear all, I'm am modelling a project that is aiming to get EAp2 at design submittal with Tender Documentation LOD (Level of Detail), meaning there are lots of parameter only defined by technical sp