For my project building the mechanical engineer has provided me with his VAV sizing calculation spreadsheets for all zones and all floors. I have taken this and edited to also perform the ASHRAE 62.1 VRP calculations. The floor plate of the building is quite large, with some floors being served via 4No. AHUs. The air is supplied via a common ring of ductwork on each floor, and as such cannot be separated per AHU, but per floor instead.

However the number of zones across the building is very large. Is it possible to use this calculation sheet for each floor to show that the design complies with EAp1&c2, or must I input the same data again either into the 62MZCalc or the online form (Appendix table)?