Forum quick links
Blow-Out Fixture Guidance
EBOM-2009 WEp1:Minimum Indoor Plumbing Fixture and Fitting Efficiencyposted by Simon Sue on
We work in SE Asia where many buildings have installed already or still install squat toilets (floor toilets) which are blow-out fixtures. In a recent review comment, we have been advised: "The fo
Project on 7th floor
CI-2009 IEQp2:Environmental Tobacco Smoke (ETS) Controlposted by Mike D on
If the LEED CI project is located on the 7th floor of a building, do we still need to provide non-smoking signs on the ground floor? There is no smoking allowed in the building following national l
LEED rating for a penthouse on top of an existing building
posted by ruffina thilakaratne on
I am working on a new two storey penthouse project which is 2900sqft and located on the roof top of a low-rise existing gym and a car park building. the project is located in Asia.
Life of lamp
EBOM-2009 MRc4:Sustainable Purchasing—Reduced Mercury in Lampsposted by Tam Kin Hung on
Refer to the reference guide, the test condition of life of lamp is 3 hours on for every 20 minutes off for fluorescents, 11 hours on for high-intensity discharge lamps.
Future development
NC-2009 SSc7.1:Heat Island Effect—Non-Roofposted by Marcio Alberto Casado Pereira on
We got a review on this credit that we don't know how to address... We are working on a multiple building Project and there is an area within the site designated for future expansion of this indus
Public space locations
ND-v2009 NPDc9:Access to civic and public spaceposted by Colin Day on
Hello Eliot, Our project has more than enough public space within the project boundary to meet the requirements to earn this point.
City transit schedule limitations
ND-v2009 SLLc3:Locations with reduced automobile dependenceposted by Colin Day on
Hello Eliot, Our local transit system does not supply bus service at all on Sundays. Besides that point, the project meets all other requiremnts exhibited in the credit language.
IEQc4.2 - Under what category fall these coatings?
NC-2009 IEQc4.2:Low-Emitting Materials—Paints and Coatingsposted by Mauricio Hernandez on
Does anyone know under what category fall each of these coatings? Sika® Permacor® 3326 EG-H Part B and Sikagard 720 Epocem, Comp. A Can I add the product cutsheet to this comment? thanks!
IEQ Prerequisite 1 Form - reoccuring error
NC-2009 IEQp1:Minimum IAQ Performanceposted by Kenneth Ruby on
IEQ Prerequisite 1 Form: I have a reoccurring error on my mechanical ventilation – Multiple Zone Chart that is reading “Would need over 100% OA Intake”.
Gallery space and daylight
NC-2009 IEQc8.1:Daylight and Views—Daylightposted by Jatuwat Varodompun on
In space matrix april 2013, the gallery must be have daylight and view acess. If my project has such space but the objects and displays are inappropriate for daylight. It might be damaged.