My project is based in Qatar and the total site area is around 13,000748 m2 of GFA comprising of 10,654 sqm of retail, 78,563 sqmof commercial office space including, 132sqm of atrium circulation,

I am working on an acutal project. We have a product (polyurethan silicone, which already is in use) with an unknown VOC content.

For the Retail projects, specifically shopping malls, where developer aims to sublet all retail units to prospective tenants and effectively will not have the control over their fit-out, or a very

CSI Section 10 is included in this credit. What would be considered toilet/bath acessories under CSI 10 28 00?

One of the projects I'm working on in Peru, is persuing the option 1 of MPR#6 (through Energy Star Portfolio Manager:ESPM) so we can get one EP point in EAc5.1. So, my questions are: 1.

When a project would be classified under Major Renovation (our project is around 80% renovated) for the energy model, does the baseline have to be the same as Ashrae 90.1 envelope requirements or c

Does anyone know what category Smoke & Acoustic Sealant would fall under? I didn't find it listed in SCAQMD Rule 1168 and the categories in the LEED manual are a bit generic.

Do we need to include section views with lines of sight drawn from 42" aff to perimeter glazing for every single regularly occupied space within the building, or are the section views only for spac

Our water reduction due to fixtures and fittings only is 38%. We have recirculating greywater in the project that will be recirculated to toilets. This will bring our reduction to 42%.

Hi, we are trying to achieve this pilot credit, and we doubt if the prefered spaces already reserved for credit SS4.3 for low emitting and fuel efficient vehicles could be counted also for the comp