We are working on a new building on a college campus for which the District purchases...

On page 591 of the ref guide, it states...

I know that Sherman Williams provides a list of products that can be used for this credit. I am wondering if anyone has found other manufacturers that provide detailed information about there...

So it is already clear cut that a LEED AP in BD+C can pursue this credit for a LEED ID+C project under LEEDv4.1.  But I've been reading the final draft of the LEED v5 guide book for ID+C, and it...

I have a very large project that will not start construction until 2022 or 2023 and it will be under construction for several years. I therefore want to be careful about sunset...

I have been advised that the TSI Dust-Trak DRX can now be used for the particulate measurements.

Has anyone used this successfully (gained certification)?

Is it acceptable to use...

The project team pursued this pilot using material data gathered for both BPDO credits. While some sections in the calculator are not applicable, the completed sections did provide clarity on the...

Hi All,

       We are going through a factory project having 3 major workshop buildings. There is no provision for space cooling by direct expansion or chilled water like cooling system....

Dear All, 

I am executing a residential project pursuing LEED O&M v4: Multifamily, where we need to conduct the location and transportation survey, as well as the occupant comfort...

Hello,
Under EAc1 my understanding is that the energy model will use a baseline assumption for plug loads. Would it be possible to introduce a plug load energy reduction program as an ID...