Hi All For a C&S project there are default FTE occupancy figures that shoudl be used for water calcs, bicycle racks etc where the final occupancy is not known.

in the project we are modelling, hot water system is preheated from the building power generators by using recovery system isntalled on the genertars ( same principle of the recovery chillers) but

hello as my project is outside of U.S, getting certification of NFRC is very difficult. in this contry has a similar test certification that comply with ASTM and this conutry reconized BUT it is no

I was reviewing the LEED addenda and noticed an interesting one for this credit.

I m modeling a 52 floor building and 2 detached retails buildings,The proposes system are chilled water system with FCU except : 1-8 floors core and shell ( m0re than 78000 sqft) 2- G+2floors

how do you deal with a phased master plan? initially create the Master Site to encompass all future phases? or create Master Site each time a new phase starts?

I am pursuing option 1, preferred parking, for a building on a campus. The new parking lot expands an existing parking lot for an adjacent building.

Hello, I am wonderinq if you can help me: where no heating system exists the heating system classification shall be asummed to be electric, and the system characteristics shall be identical to the