https://leeduser.buildinggreen.com/forum/black-box-or-transparent-benchm... Log in or register to post comments ...

I have been attempting to access leedonline for the last 20 minutes and receive the following:
This page can’t be displayed

•Make sure the web address...

We have an office building project with garages going 4 storeys underground. The building foundation slab is about 16m deep. Should this slab still be considered for 'slab-on-grade' (even if it...

Hi there

Can we use our pumps Balancing/Start Up Report Hp's rather than the Design? Or does LEED/Ashrae require us to model at design conditions (since Balancing/Start Up Report are ...

Hi everyone,

I'm modeling an office building under LEED CS v2009. The scope of C&S includes a centralized cooling and heating system (air cooled chilers and heat pumps), ventilation...

Does plywood that meets...

Dear,

We have made several daylight simulations with option 2 for different projects. So far, it seems nearly impossible to achieve even 1 point for this credit, mainly due to the 3000 lux...

Hi,

I am in the process of responding to a LEED reviewer comment concerning how to claim lighting power...

Hi folks,

SSc5 - Heat Island Reduction

Core & Shell V4

Working on an office project with occupiable roofs on floors 3 – 8.  Each outdoor patio consists of green...

My company has a CSR report that complies with the requirements in Option 2.  We have found that when our company makes up at least 20% (by cost) of the design contract we can easily achieve the...