Jon Clifford LEED-AP BD+C GREENSQUARE LEEDuser Expert 326 thumbs up March 28, 2017- 10:05 pm Denise—As Erica notes in her March 14 response on the MRc5 forum (http://www.leeduser.com/comment/redirect/71061), the requirement was to upload cut sheets for 20% of the sustainable materials cost (the cost contributing to your MRc4 or MRc5 tally). However, as Michelle points out in that same discussion, the latest versions of LEED Online documentation no longer requires uploading cut sheets. Log in or register to post comments Erin Holdenried Sustainable Design Director Bell Architects LEEDuser Premium Member...

Hi all,

In the ref guide (p.514), it states that as part of Industry Wide EPD "the manufacturer is explicitly recognized as a participant by the program operator." However, this is the...

Our project is a student dorm on a university campus. The campus generates most of its power with their chilled water and co-generation plants and they purchase very little energy from the local...

I have seen several references to View Factor 3 and cannot find any definition.

If I am using all reclaimed/recycled water, do I still need to use the calculator. Where do I download the calculator? By using reclaimed/recycled water, do I get 2 points?

several products we got from different subs/ suppliers submitted us product cut sheets that indicate that plywood based product is "exempt from testing by...

For option 1, is it acceptable for manual controls to be accomplished via a software interface rather than a physical switch? In the vision for this project, users can control lighting in their...

We have a project that uses water cooled ice machine, but the coolant for the system is provided through a refrigerant through a closed loop system. The production for the ice maker also meets...

Hi

If a project size is modified (the...

I am working on developing the required monitoring plan, but in conversations with the American Bird Conservation manager, drafting a plan for a new building cannot be drafted in the way the...