I am working on a AAA Ballpark project. My understanding is that the lighting power density for the external floodlighting is required to comply with a figure of 2.15 W/m2 as it’s been classified

If I have parking lot lighting existing on a site that is near our project but outside the LEED boundary I assume that will not be required to be incldued in Light pollution calcs.

These questions are in regard to exterior lighting power calculation. I am fine with the general approach and calculation.

GBCI brought to my attention a correction that needed to be made to our FAQs.

Hi All, My project consists of a large parking lot where all interior parking spaces are located under solar canopies and perimeter parking spaces are uncovered.

We have a site with 3 product buildings and a small separate canteen building .

We are working on the site illumination model to measure compliance with the light trespass requirements.

We are working with an office building which has requirements for providing working stations between 11 pm and 5 am.

I tried to fiend a definition of "Shield envelope openings that have a direct line of sight to non-emergency luminaires".

Regarding the interior light requirements: We have an office building that is not intended to be in use during the 11pm to 5am period, therefore we will have automated controls w/ manual overide an