Hi, We have a manufacturer's statement and it says: "materials used to manufacture above mentioned products are approximately in 90% extracted/produced within 500mile radious from the constructio

Working on a new police station and trying to find a route to get SSc4.4 (LEED 2009). Anyone have any thoughts? We have public and secure parking which is for police vehicles only.

I have a reviewer requesting that we oversize the PROPOSED case for a "possibly conditioned in the future" warehouse. We have usually modeled the BASELINE case and PROPOSED case identical, then ove

Hi. In option 3 of this credit “Building and Material Reuse” we must reuse or salvage building materials from off site or on site as a percentage of the surface area.

To comply with IEQc4.4 credit in LEED NC It has been evaluated local furniture suppliers of MDF, used for new buildings and the most regular composite woord and agrifiber for new buildings. In Peru

We have a tower project in SE Asia that will have several decorative water fountains.

Can you take credit for occupancy sensors that control HVAC systems? I am thinking probably not for system operation E.g setbacks, agree? But I am unsure for the ventilation.

I'm working on a CS project (v2009) and I have a question concerning the definition of vegetated areas/roofs and the compliance with SSc5.2, SSc7.1, SSc7.2, etc.: Do ruderal vegetation areas (so no

Hello, I am working in a DES heating and cooling thanks to sea water and I would like to know if it is taking in account as a non-roof measure.

I am trying to understand whether the modelling for Option 2 of this credit is supposed to be done using the ECB method or Appendix G.