The credit language states that projects in Urban areas achieving SSc2 can contribute with green roof/pedestrian oriented hardscape. Are projects in Suburban areas achieving SSc2 allowed to do so?

Dear all, we have the following situation with one of our projects. The project we are certifying is a laboratory building that is a part of the big existing factory site.

Pending our participation in this forum, we have met all the documentation requirements for this pilot credit, so I thought I would share some tips. 1) Potential Design Strategy: Our project is a

If you have submitted this credit please post if it was awarded or not. If you abandoned the credit at some point in the process when and why? Thanks.

Hi all! I have a doubt about EPD, could someone help me? This credit explains that products with LCA (ISO 14044) or EPD (ISO 14025) that have at least cradle-to-gate scope are valued as 1/4.

For a warehouse, can I deduct the permanently fixed high racking coverage area from the gross floor area, and focus my 75% daylight coverage on the aisles and landing spaces only? I say yes.

Theoretically one might think modeling the glazing and shadowbox portions of a curtain wall with a single assembly u-value would yield the same result as modeling the curtain wall as glazing for th

Hi Everybody, ASHRAE 62.1 currently outlines a minimum ventilation rate for all room types, regularly occupied or not (i.e.

Hello, I'm working on a CS Project larger than 300,000 square feet.

I have several pre-rinse spray valves that were specified by an external laboratory consultant in a college laboratory building that do not appear to meet the requirement of being less than or equa