Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Mechanical enclosure non-roof?

NC-2009 SSc7.1:Heat Island Effect—Non-Roof
posted by  Nicole Kimoto  on 

Can we include the concrete paving provided in our project as part of the non-roof area?

1
Mon Jul 15, 2013, 3:31 pm

Sustainable Sites credit in LEED for Homes

LEED for Homes (LEED-H) Forum
posted by  radwa rostom  on 

Hi all, I have an inquiry in the sustainable sites category. in 1. site stewardship, point d "build on a lot of 1/7 acre or less, or 7 units per acre" what does "lot" mean?

0

Military installation with male dominated population

Pilot-Credits WEpc10:Sustainable wastewater management
posted by  Joanna Switzer  on 

I am part of a team working on a multiple building complex LEED project at an Army Infantry installation.

0

SS7.2 question about form

Schools-2009 SSc7.2:Heat Island Effect—Roof
posted by  John Paul Chulliyil   on 

Hi all, I am in the middle of working on the SSc7.2 roof for and a bit confused. We are using a High albedo material covering 100% of the roof.

1
Mon Jul 15, 2013, 8:12 pm

Development density - site area

NC-2009 SSc2:Development Density and Community Connectivity
posted by  John Edwards  on 

I have a project that has 30 stories of above-grade office/retail/parking structure and 3 levels of below-grade parking.

1
Wed Jul 24, 2013, 9:36 pm

Product Catalog or Brochure of Building Equipment.

NC-2009 EAc4:Enhanced Refrigerant Management
posted by  Sangmin An  on 

Hello, I have a few questions regarding how to demonstrate the amount of refrigerant charge. The questions are as below. 1. Situation We are preparing design phase review.

1
Thu Aug 1, 2013, 3:28 pm

1-year-24-hour data in the UK

NC-2009 SSc6.1:Stormwater Design—Quantity Control
posted by  Alicia Freire  on 

Hello I am working on a project in the UK and we are struggling to get the 1 year 24 hours rainfall.

1
Sun Nov 3, 2013, 4:03 am

Low Impact Development and green infrastructure strategies

NC-2009 SSc6.1:Stormwater Design—Quantity Control
posted by  Alicia Freire  on 

Hello When following the ACP, the LEED manual states that attenuation must be undertaken through Low Impact Development (LID) and green infrastructure strategies.

1
Tue Jul 16, 2013, 4:12 pm

Compliance with Table 7.8 - Service hot water

NC-2009 EAp2:Minimum Energy Performance
posted by  Ward Miller  on 

As far as we read the Mandatory Requirements of ASHRAE 90.1 required by EAp2, performance requirements must meet the specifications of Table 7.8.

1
Tue Jul 16, 2013, 2:54 pm

Peak transient numbers in bicycle rack calculation

Schools-2009 SSc4.2:Alternative Transportation—Bicycle Storage and Changing Rooms
posted by  Shivani Langer  on 

As discussed briefly above: even though the credit language states bicycle racks are to be calculated for only student and staff, LEED online form includes transient numbers in its calculations.

1
Wed Jul 17, 2013, 3:02 pm