Hi, I am working on a mixed use project with retail on 1st floor and office on 2nd and 3rd floor with a total project area of 115,000 sf.

I recently got a review back that said that every material I am using to demonstrate compliance for Mrc5 is an assembly and "therefore, the individual components must be separated by weight." Sinc

I am working on certifying a warehouse, and would like to consider the forklifts as individual workstations, as the warehouse employees are each assigned one (in lieu of a desk) and allowed to pers

We are working on a project in Costa Rica where the access road is a dirt road.

Per step 2 for noninpatient buildings and areas "for portions of the perimeter wall with full-height glazing, the qualifying area may be extended beyond the 15-foot limit to twice the head height o

As some of you know the Green Building Initiative is releasing the new version of Green Globes for New Construction which is based on ANSI/GBI 01-2010," Green Building Assessment Protocol for Comme

does the raised floor has to meet the floorscore requirements?

I am working on documentation for this credit but need some advice.

I'm cross posting my question here, as it pertains to LEED v4 raw material sourcing, and in documenting regional materials, others may have encountered the same issue. I am working on documentatio

Many thanks to Christopher Schaffner for linking in his post below to the Berkeley CBE free online comfort tool at: http://cbe.berkeley.edu/comforttool/ I use the Windows XP operating system, and