Hi everyone, We have a C&S Major Renovation Manufacturing Facility project. The building is doubling in size and some adjustments will be performed to the envelope of the existing building.

We have a project with a central plant with chillers that has R-11 refrigerant.

Planning to use Carrier variable speed heat pumps split systems on a project and I am looking for data files to assist in this. The manufacturer rep is not aware of anything that can help.

We have tried to comply with this credit using waterless urinals and dual flush toilets with a very low flush (3L/435L)

The existing conditions of the site have 55 existing parking spaces. Our plans show that we are taking out 14 parking spaces and adding 16 addition spaces, totaling 71 parking spaces.

Hello We are developing a project of air conditioning a building certified LEED NC 2.2 and wonder if all Fancoletes and fans small (about 200), should be interlidados in the building automation sys

We are working to restore two commercial/residential historic buildings with the intent of achieving LEED certification.

Dear community, I am facing a problem meeting the eap2 credit since my project presents almost 80% energy cost related to process.

How are the FTE and PTE numbers derived? The project is for a surgical addition.

I am not familiar with this credit so bare with me. Does each space (room) have be be listed on the IEQc2 form? Is there spread sheet format that can be used? Any recommendations will be greatly