Hi, I have a project planning to use 100% non- potable water for irrigation.They are planning on doing this through collecting rain water.

The definition of Unmet Load Hours has been vague for quite some time. ASHRAE 90.1 2010 was supposed to address this issue. Do we have some resolution about this yet?

If a project is pursuing option 1 development density calculations must there be a residential element recorded within the 60,000sf/acre figure? thank you

Our building has a large number of tenants with separate management. Their IT equipment go back to the manufacturer and do not go to the building main waste stream.

I am sure this has been answered elsewhere in this listing but I am confused by the back and forth about auto-shutoff faucets, the most common commercial lavatory faucet in much of the work I am in

Thanks so much for coming up with a simplified and reasonable way of documenting ongoing education!

The brewery I am modeling has large percentage of energy consumption associated with the process load.

Hello LEEDuser.com community, My name is Pearl Frank. I am the Project Leader of a LEED EB Certification project on an existing campus building at Purdue University.

Is it required that habitat area be preserved for the life of the building (like open space in SSc5.2). The credit does not specfy this requirement.

Hi, Can you help with the following two issues: 1.I understand proposed total installed lighitng power has to be the same in the energy model and in SSc8.