We have a small mechanical equipment room that contains a backup diesel generator. It is being ventilated to remove exhaust and excess heat.

Should flooring adhesives take credit under IEQc4.1 or IEQc4.3, or both? Thank you!

Seems like a no brainer - substituting LED light fixtures in our parking lot will cut energy consumption by 80%. This does not seem to be covered in other LEED credits.

We have a LEED-CI project with a small Gym. The gym has the daylight provision with full height window. Do we need to provide the photo cell sensors at the gym as well? Thanks.

Hello, I am working on a data centre which, as it is common in this type of buildings, has a “Crisis room”.

Our client is developing an office project consisting of three office towers with a common open plan ground floor and two common basement parking floors.

IEQc1 requires confirmation that the building services have been designed in accordance with ASHRAE. A statement from the mechanical engineer is required to demonstrate this.

Our design has four Dual Duct VAV units that share common plenum return that is recirculated thru both hot and cold deck of each unit. Each unit has it's own OA intake.

I'm reviewing a project that will install skylight for basement parking. The skylight and the building footprint is inside the project boundary.

Hi, While documenting energy star rated products for EAc1.4, the rated power is to be used. My understanding is that this is the name plate power for the appliance.