I have a question to calculate the FTE for a residential project (2 towers in one condominium of one building).

We have a project where caopies at an intermodal station are considered a roof system by code yet are not attached to the facility and do not fall under the LEED definition of a roof.

This usually will be the portion of the construction documents that show the major HVAC equipment in tabular form.

As ASHREA90.1-2007 shown,the slab-on-grade floor of baseline building shoud be modeled by the parameter of F-factor.But the parameter to model slab-on-grade floor in program eQuest is U-value or pr

I'm working on LEED for a stadium, and we have a bit of trouble interpreting requirements of ASHRAE 90.1 -2007 section 8. The project will have a tranformer that will filter the high voltage.

If the construction site is really "active", that is to say there is earth movement everyday and the slopes are changing every couple of days, do we need to protect them everysingle day? According

We are renovating and entire floor (43,000 office space square feet).

Our project has existing non-structural plaster walls that will be reused in place.

If I understand correclty, we can use the table in the reference guide with several BMPs to determine the removal efficiency.

we have a LEED ND project in South Africa, which we registered early this year at Stage 2.