Dear all, We have mechanically ventilated spaces. For the option 1 we therefore have to comply with the requirement B. interior cross-contamination prevention.

certified projects are still displayed and accessible at the new LEED Online?

Hello, a question concerning WEp1 Could I use the flow rate in Units of gallons per cycle (gpc) instead of USgallons per minute (USgpm) for the Shower as Fixture Family in Table WEp1-4.Flow Fixt

Hello, our project is located directly along a public sidewalk. There are several retail tenants in the project.

In Germany the (property) owner has to arrange inquiries regarding the soil pollution and burden by weapons, explosive ordnance and combat equipment (military hazardous waste).

There are a few AHUs in the project for which I work. One AHU supplies less than 20% of the non-densely-occupied rooms with its air volume flow, but still has outdoor airflow measurement devices.

Hello all, We have a C&S office project where the owner prepares technical infrastructure for VRF heating cooling system in tenant area.

We have a MR V3.0 project that uses district cooling. First I thought this was great, as no refrigerants are used in the building. Now the district energy guidelines say, that we have to provide al

HI, I am working on a store with two lighting types: furniture lighting and ambiant lighting. Only a part of the ambiant lighting is controlled depending on daylight illumination (40%).

Dear LEED community, we are working on a project in Berlin, Germany.