My building is a licensed hospital and we are trying to be certified in the category of LEED Existing Building O&M as Healthcare option is not available in LEED V.3.

Dear all, I am targeting the Daylight credit by modelling based on Option 2. However, the simulation results show that the illuminance level over the threshold (3,000 lux).

Is there a minimum number of logs required to be submitted to comply with this credit? The project I am handling wishes to install the meter but because of the log requirement, we might need to de

My project has apartments and penthouses on the top. Engineers design VRF with thermostat and residents can control their comfort thermally.

Hi, a solar PV consultant gave me an output of their simulation, in which show probability distribution diagram of Solar PV production.

Hi everybody, The project is a garment factory. We are modeling a 100% outdoor air IEC system for the proposed case. And the system 8 (VAV with PFP Boxes) is modeled in the baseline case.

I assume exterior window and doors are included in this credit, as they are excluded from MRc1.1?

In the earlier credit form, we had to enter the total number of showers/ changing rooms in the project.

The "LEED 2009 Global Alternative Compliance Paths Credit Table" (http://bit.ly/2ovIELH) does not include an ACP for C&S MRc6 Certified Wood, but there does exist a pilot for Legal Wood (http:/

Dear LEED, We are trying to achieve points in EAp2 scorecard via Building Simulation Method.