1.

For the requirement of uploading interior renderings or drawings during the design phase -- what kind of drawings are acceptable?

Will the above certificate in place of one type furniture item be acceptable for this credit?

Dear Forum, I am modeling a building which has no heating or cooling system in the design, so, according to Appendix G, I have modeled these systems exactly the same as in the baseline design.

Since our project is quit big we have hired an independent firm for our commissioning of the project and not a single person.

Hi! We have some canopies in our project, but one of these canopies is 5w over-lighted. It's our understanding that we can make it up by under-lighting other tradable surface.

What should the reference evapotranspiration rate (ETo) be expressed on the online form as? inches/month?

My question is. The Guide says choose Case 1 Sites with Existing Imperviousness 50%or less or Case 2 Sites with Existing Imperviousness greater than 50%.

I am modeling a building that directs all building exhaust through an energy recovery ventilator, including bathroom exhaust.

Talking about a VRF HVAC system. Is it a mandatory requirement that the VRF condenser and evaporative units must be ARI Certified, according with the Standard 90.1-2007?