I have a project where we only have 3 parking spaces provided, resulting in a substantial reduction from the baseline. However, the client is reluctant to reserve these exclusively for carpools/va

The kitchen consultant on our project has specified a Hobart LT-1 LOW-TEMP CHEMICAL DISHWASHER. While most Hobart products are E-Star, this one is not.

Hello, We are working on a LEED NC 2009 project with DES which the thermal plants consist except boilers and electric chillers also a cogenerator and an absorption chiller. We are thinking to follo

Hi! I have a question similar to the one posted on Nov 18 2013 below.

Hi there! Regarding regional materials do distributors facilities need to be counted within the 500 miles radius?.

How much of the building must be ready before you can send in constuction review?

We have steel on a project that is documented to be 99% recycled content, all recovered within 500 miles of the project site.

We will be using crushed concrete from an exiting building on site for subbase for access road. I understand this cannot be used for MRc3 Material Reuse, but rather for MRc4.

Hey everyone, I have a question about the best software choice and modeling strategy for water-source VRV (or VRF) systems.