Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Compliant exterior products

Pilot-Credits SSpc154:Heat Island Mitigation with Cool Walls
posted by  Michelle Rosenberger  on 

The Cool Walls database of compliant products does not include a wide range of products. Our warehouse project couldn't find an exterior paint that had elastomeric properties in the database.

0

Infiltrations

NC-v4 EQp1:Minimum indoor air quality performance
posted by  Juan Perez  on 

Is it feasible to add an infiltration rate into the outdoor air provide per the HVAC to meet the minimum requirement?

1
Sat May 11, 2024, 8:24 pm

No irrigation system- Rainwater

NC-v4 WEc1:Outdoor water use reduction
posted by  Santiago Avila  on 

Hello everyone

Currently I am working in a project which does not have an irrigation system, and will be watered with collected water from rainfall.

0

lighting controls

Retail-CI-v2009 EAc1.2:Optimize energy performance - lighting controls
posted by  ARGIA ARROYO BUGANZA  on 

LEED REQUIREMENT: Verify 15’ perimeter needs to be covered for daylight dimming- This includes private offices-all spaces within 15’ of perimeter- WHAT HAPPENS ONE OF MY FIXTURES (OPEN SPACE)

3
LEED AP
Bureau Veritas
LEEDuser Basic Member
0 thumbs up
Tue Feb 20, 2024, 4:04 am

Opt 2, path 4 Reuse and Salvaged Material requirement

NC-v4.1 MRc1:Building Life-Cycle Impact Reduction
posted by  Dave Hubka  on 

I can't seem to find a minimum threshold for the amount of reused / salvaged materials required to be able to achieve all (4) points within Opt 2 Path 4.

5
Senior Benchmarking Specialist
Atelier Ten
LEEDuser Basic Member
1 thumbs up
Mon Feb 19, 2024, 1:24 pm

Carbon Emission factor for excavation/construction

Green Commons
posted by  Teresa Jan  on 

I was wondering if any design or contractor friend here can kindly share the carbon emission factor of excavation during construction. 

0

Looking for on going LEED project to work and get hands on experience

LEED v4.1 Discussion Forum
posted by  Muhammad Umar  on 

Hi everyone, I'm Muhammad Umar LEED AP BD+C & O+M. Looking to working in ongoing LEED projects in construction phase or design phase espically for LEED online.

0

Want to have hands on experience

LEED v4.1 Discussion Forum
posted by  Muhammad Umar  on 

Hi everyone, I'm Muhammad Umar LEED AP BD+C & O+M. Looking to have hands on experience in LEED projects. I'm looking looking to participate in ongoing projects in construction or design phase.

0

PowerNest Wind & Solar System

SC Leaders
posted by  Laura Soma  on 

Has anyone worked on a project installing a PowerNest system?  I just found out about it today and would love to get working information on it.  

2
Director of Sustainability
Columbia
LEEDuser Basic Member
0 thumbs up
Fri Feb 16, 2024, 2:51 pm