I have a project with two buildings that are attached physically by two underground levels with services as parking spaces, bicycle racks, showers and bathrooms and MEP systems shared for both bu

Hi everyone, It is necessary to prove the power density in external illuminations with the following characteristics: - Accent lighting (lighting focused on plants and trees) - Lighting for vi

The project I'm working on currently is for a production plant and office zones all in one building.

Our project has conventional faucets and metering faucets on the same floor. Each of these faucets have different defined baselines.

Hi Marcus et al., I received a question from one of our project energy modelers that I cannot answer - Recently we have been receiving a new comment on EAp2 that states “The HVAC equipment cap

At the time when we were submitting our design submittal, the elementary school project was only going to be able to get 7% of its energy offseted with renewables.

Hi everyone! I've some doubts about this points. Whats is the setback temperatures? The time setpoint not met is calculated only in the occupied hours?

Hello, my qeustion is regarding our medical gas system and if it should be part of the fundamental commissionig for LEED? We will undertake commissioning of the system but would prefer to excluded

Dear Sirs, I just want to double check if we need to commission, as part of the LEED PRerequisite / Credit, the following systems: 1) Pumps for water distribution, irrigation, sewage, and fuel 2)

We are assessing a C&S 2009 project. We have two sheltered walls with neighbors on both sides. The walls from the neighbors are not along all the project walls.