Hi all, I have doubts about the definition of nonbuilding facilities (when it said ‘Parking lots, landscapes, and other nonbuilding facilities are not included in the building footprint’). My pr

Quite a few multi-tenant commercial buildings have earned LEED EB O&M, and since you are only allowed to exclude up to 10% of a building's area the tenant occupying the 25% would need to partic

We are working on a retail/catering facility that we cannot currently certify as NC because the addition we are doing is not large enough to qualify.

Hi I receive several MSDS for the coatings that will be used in our project and inside them, the VOC content is measured in Europe (EU) which are usually expressed in percentage % (w/w).

Our project has access to 2 bus stops, 1 located just outside of the building's perimeter with 2 bus lines and the other one is the main one, whit main it means that's the one the 90% of the people

We are evaluating an international (non-US) project that would like to build 2 separate buildings on one single site.

I'm working on finalizing documentation for a LEED project. We have completed the calculations and are only looking about 15% savings.

One LEED site boundary has two individual LEED projects that are under construction under one contract by the same GC.

If you are registered for LEED v2.2, then you must follow AGMBC, 2005. As you mentioned, all 4 buildings must independently meet the requirements for the EQ credits.

As 1.6 is a standard low flow toilet, in order to further reduce water use is it better to specify a 1.28 gpf or a dual flush toilet? Thank you.