Dear All, I want to model a school project with 3 unconditioned basement floors hosting a car park. Do we really need to draw these spaces in the 3D model of the simulation, or can we just calcul

Am working with a project on LEED NC version 2009 which is located in Melaka, Malaysia.......... I have a doubt in species factor for Axonopus compressus.... Whether i can consider Cow grass ( Ax

This is a question from a non-energy modeler looking for some guidance on base case vs. design case for a LEED energy model that a consultant is working on. The project is a school.

We really need to meet the ratio of 1 for every 10 car parking spaces for carpool (10%)?. These should be separate or together?.

I am working on a large dormitory project which requires a "spoil area" on an adjacent lot which accommodates the excess soil in the cut/fill process of regrading the site.

In a multiple building project we have 100 identical staff housing units that need to comply with AHRAE for EAP2. Must we test each and every building and can we do a % of them?

Hello, I am working on a residence hall and we have a total of 12 FTE, 3 Transients, and 654 residence.

Hey, I have a Multi-Story Office building that is looking to achieve 19 points by purchasing PV Panels to offset the energy consumption.

It's not clear to me what I have to upload onto the form for option 1.

How do you determine the predicted acceptable corrosion rates for each pipe material in the condenser water system?