Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

scope of materials

CI-2009 MRc3.2:Materials Reuse—Furniture and Furnishings
posted by  Adam Targowski  on 

I would like to clarify what should be included in the calculations for this credit.

1
Thu Oct 25, 2012, 4:23 pm

LUSTs discovered and remediated

CS-2009 SSc3:Brownfield Redevelopment
posted by  charles bell  on 

Project is urban core multi-story mixed use CS. Leaking Underground Storage was discovered and remediated (including soil) and identification of water wells in the vicinity.

1
Mon Oct 22, 2012, 5:01 am

Requirement for CO2 sensor and OA measurement device

NC-2009 IEQc1:Outdoor Air Delivery Monitoring
posted by  Barbara McCrary  on 

I found a thread from 2011 discussing the Addendas released 5/9/11 removing the footnote that was previously changed under Addenda reliease 9/19/10.

1
Thu Oct 18, 2012, 2:40 pm

Best Timing for ASHRAE Audit?

EBOM-2009 EAp1:Energy Efficiency Best Management Practices
posted by  Nelina Loiselle  on 

What is the best timing for the ASHRAE Level I walkthrough audit? We have our energy star label already, are working on getting our tracking in place for the other credits.

1
Thu Oct 18, 2012, 8:21 pm

Core Fixtures Existing, Tenant to Install Additional Fixtures

CI-2009 WEc1:Water Use Reduction
posted by  Nelina Loiselle  on 

I have a LEED-CI project in which there is one toilet that is EXISTING in the base building and NOT A PART OF THE SCOPE of the tenant improvement.

1
Thu Oct 18, 2012, 11:11 pm

Motorcycles parking space

EBOM-2009 SSc7.1:Heat Island Reduction—Nonroof
posted by  Rosana Correa  on 

In our project, some of the parking spaces are specific to motorcycles, with smaller areas than in car's spaces.

1
Fri Nov 23, 2012, 4:07 pm

Category for IEQ Credit 4.1

NC-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  S D  on 

I am new to the LEED process. I am having trouble determining which categories the following products fall under for the purpose of IEQ Credit 4.1.

1
Mon Nov 26, 2012, 6:44 pm

I wonder how I should model a Ventilation system

CS-2009 EAc1:Optimize Energy Performance
posted by  Ron Dean  on 

I wonder how I should model a Ventilation system to comply with Apendix G ASHRAE, it said that my proposed desing shall be consistent with design documens.. This is the description of my system: &g

0

LEED Boundary for ESA

Schools-2009 SSp2:Environmental Site Assessment
posted by  Karen Richards  on 

If doing a 3,700 sf building in the corner of an existing 18 acre school campus, does the Phase I and possibly Phase II assessment need to be for the entire campus or just the area within the LEED

1
Mon Oct 22, 2012, 4:35 am

How to identify third-party certifying bodies?

ND-v2009 GIBc1:Certified green buildings
posted by  Shenhao Li  on 

As subject indicated, how to identify third-part certifying bodies as defined by ISO/IEC 17021.

1
Wed Oct 24, 2012, 4:41 pm